The 5-Step Delivery & Setup: From Alabama to Your Site in 48 Hours

Demystifying the Logistics of the $84,999 Kozzi Model 20

BLUF (Bottom Line Up Front): Delivering a 10,000-lb steel restroom module is a precision operation requiring a specialized flatbed transport and a 60-ton hydraulic crane. While the $7,500 logistics investment (typical $5,000 delivery / $2,500 crane) represents a significant initial cost, it replaces weeks of on-site construction mess, permitting delays, and contractor management, allowing for a "Plug-and-Play" commissioning in under four hours.

1. Step 1: Site Feasibility & "Zoneifi" Analysis

Before the truck ever leaves our Birmingham, Alabama facility, we perform a digital "Dry Run." Using the logic from our Zoneifi platform, we analyze the "Final 100 Feet" of the delivery.

  • The Overhead Check: We identify power lines, low-hanging tree limbs, and narrow gates.

  • The Ground Pressure Test: A 10,000-lb unit plus a 60-ton crane requires stable soil. We ensure your site is prepped with either a concrete pad or Helical Piles to prevent settling.

2. Step 2: The "Over-the-Road" Transport ($5,000)

Shipping a 20-foot ISO-Corten container isn't like shipping a parcel. It requires a "Class A" driver and a specialized tilt-deck or flatbed trailer.

  • The "G-Force" Engineering: Because the Model 20 has delicate Japandi interiors and porcelain fixtures, we utilize air-ride suspension and industrial-grade tie-downs.

  • The Logistics Cost: The $5,000 delivery fee covers the fuel, oversized load permits (if applicable for 10ft units), insurance, and the specialized driver who knows how to navigate tight venue entrances without damaging your landscaping.

3. Step 3: The Precision Lift ($2,500 Crane Fee)

This is where the "Kozzi Magic" happens. A 60-ton crane arrives to perform the "Final Placement."

  • The Pick-Point Advantage: Unlike wood-frame trailers, a Kozzi unit is lifted by its four corner castings. This prevents the "Frame Torque" that causes windows to crack in cheaper units.

  • The $2,500 Value: This fee covers the crane rental, the certified operator, and the rigger. They ensure the unit is placed to within 1/16th of an inch accuracy on your foundation.

4. Step 4: The "Master Seal" Commissioning

Once the unit is on the ground, it's time for the "Veins" to be connected.

  • Electrical: A single 200-amp "Quick-Connect" or hard-wired junction box.

  • Plumbing: A 4-inch PVC waste outlet and a 3/4-inch potable water intake.

  • The Timeline: Because we’ve pre-tested every sensor and pipe in the factory, your local plumber and electrician can have the unit "Live" in roughly 2 to 4 hours.

5. Step 5: The Handover & Maintenance Brief

We don't just drop and drive. The final step is a walk-through of the Touchless Tech and the Odor-Zero HVAC settings.

  • Remote Monitoring: We show you how to check your sensor levels and program your automatic flushes for off-days.

  • The Result: You go from a vacant lot on Friday morning to a fully operational, luxury restroom landmark by Friday afternoon.

Technical Spec Table: Logistics Edition

Item Requirement Cost Allocation
Transport Air-Ride Flatbed Fuel, Permits, Driver
Weight 10,500 lbs (Empty) Insurance & Rigging
Foundation Helical Piles / Pad Site Prep (Customer)
Crane 60-Ton Hydraulic Operator & Setup Fee

Pre-Arrival Checklist for Developers

  1. Soil Compaction: Ensure the crane's "Outrigger" zones are compacted and level.

  2. Utility Stubs: Have water and sewer lines stubbed up within 3 feet of the final placement.

  3. Path Clearance: A minimum 14-foot vertical clearance for the truck and crane.

  4. Permit Check: Ensure your "Modular Placement" permit is posted and visible.

The "Why" Behind the $7,500 Logistics Investment

Many first-time buyers ask: "Why can't I just tow it with a dually truck?"

  • The Warranty: DIY towing can void your structural warranty.

  • The Precision: A crane placement ensures the unit is perfectly level, which is critical for the proper drainage of your PEX-B Manifold and Coved-Base floor. * The Mess: Traditional construction would have 10-15 trucks coming and going for 3 months. We give you one truck, one crane, one day.

 

Ready to Build? Contact Kozzi Space

If you’ve checked your site requirements and you’re ready to take the next step toward launching your modular cafe, reach out to the Kozzi team directly:

 

Back to blog